Showing posts with label wireless communication. Show all posts
Showing posts with label wireless communication. Show all posts

Sunday, September 29, 2019

WIRELESS ANTENNA

WHAT IS ANTENNA :
                                             "It's a electromechanical structure which is used to transmit and receive  electromagnetic signals into space" .

HOW THE NAME ANTENNA COINED:

                              We know that in communication we require a electrical signal to be transmitted in the wire. But we cannot link long distances due to requirement of high infrastructure . And maintaing of these electrical cables is very difficult or we can say almost impossible .
                     So avoid this problem the scientists decided to use free space as the medium . But we all know that free space cannot be used to transmit electrical signals .
         NOW Scientists thought of something which will convert the electrical signal to electromagnetic signals and radiate it in free space 
And this is how "Antenna" was come into picture.

HOW ANTENNA WORKS:
                                             According to source theorem we know that "Maximum power will be transfered between source and destination if there is equal load on both sides or there should be matching in impedance ".
                        So what if there is mismatch in impedances , Suppose we have sent 1 watt power and the power reached to destination is 0.9 watt . 
          The question arises that where that 0.1 watt of power has gone. The Answer to this question is that " LEAKAGE CURRENT" .
The 0.1 watt will be converted to leakage power and it will be in terms of "RADIATION". Which is basically a electromagnetic waves.

The below figure shows "reflection signal and radiation"
HOW REFLECTION SIGNAL IS PRODUCED IN WAVEGUIDE
"Production of Radiation by using waveguide "

                                                                                 
But the problem is that it is only small amount of radiation which can cover very small distance of about 100 meters .

CHALLENGES:

1) The radiation cover very small distance .

2) To increase radiation we may think of increasing power but it should be kept in mind that the human and other living cells will be affected due to more powerful radiation so we can no more increase power level.

USE OF ANTENNA TO SOLVE THIS:

Now the concept of antenna came that , If we increase the width of waveguide at destination side we can get more radiation's  with the same input power of 1 watt ( just for example purpose) .

HOW RADIATION INCREASE WITH INCREASE IN WIDTH OF WAVEGUIDES END:

                                   Basically radiation is nothing but leakage current . so as conducting medium increase the amount of leakage current will increase and automatically the amount of radiation will increase.

The below figures shows amount of radiation for various antenna widths .

Note: It is to be pointed that the width is increased in small amounts for comparison purpose.

HOW REFLECTION SIGNAL IS PRODUCED IN WAVEGUIDE
"small amount of radiation for small antenna width"


HOW REFLECTION SIGNAL IS PRODUCED IN WAVEGUIDE
"Amount of radiation increase with increase in antenna width"


HOW REFLECTION SIGNAL IS PRODUCED IN WAVEGUIDE
"Radiation further increase with antenna width"


  BUT up to what extent we can increase the width of antenna .
The limit for that is " not more than 90 degree".

                    Because anything beyond this will lead to same results as original width of waveguide . it is shown in below figure .
                                          
It is maximum width of antenna beyond which results will be similar to original waveguide
"It is maximum amount of tapering limit for antenna beyond which the results will be similar to original waveguide".


ALSO READ HAND OFF IN WIRELESS COMMUNICATION
                                                 click here











Wednesday, August 7, 2019

HAND OFF

Hand off:
                   " Its the processes of transfering a call from one base station to other base station".

Why the hand offs are needed :

                    To Understand this let us take an example of a standing speaker which is not in motion and suppose you are moving away from that speaker .As you move away from speaker the intensity or strength of sound we receive will decrease . In the same way as we are moving in one "cell" away from its center point the strength of signal will go on decreasing and when we are at boundary of the cell the signal will be very weak weak . So in order to keep the communication noise free and with good strength the control of the current call is given to the other base station which is next to the current base station.
                           So when user moves towards end of that cell then again the call is handed off and  is to be continued .
Types of handoffs:

There are two types of handoffs 

1) Improper Handoff
2) Proper Handoff

Improper Handoff:

      As illustrated in below figure in this type of handoffs the handoff is not performed when the signal is in minimum acceptable level .Because when the signal falls below this level then call will be terminated.
There are chances of call drops in this condition.
improper handoff situation in wireless communication
"IMPROPER HANDOFF"


Proper Handoff:
                             "In this type the call is handed off when the signal is within the minimum acceptable level . So there is no risk of "call drop" in this condition.
The proper handoff condition is shown in below figure.
condition for proper handoff situation in wireless communication

"PROPER HANDOFF "



When The Hand Offs Are Made:

                   In todays mobile systems the handoffs are mobile assisted (MAHO) .Every mobile will measure the strength of signal received from the current base station and shares the results with serving base station . A handoff is initiated  when power received from the neighbouring base station begin to exceed the power of current base station by certain level or for certain time period..



Disadvantages Of Handoff:

1) The handoff should be made         within the given time period ,   otherwise it will lead to call drop     or call disconnection.

2)  The call should be handed off when it is really needed .
e g: Due to poor weather conditions some times we receive weak signals at that time the call should not be handed off .


click here  

        

Wednesday, July 24, 2019

WHAT IS WIRELESS COMMUNICATION



WIRELESS COMMUNICATION:


            " Its a type of communication where there is no use of wires, i e: it is done through electromagnetic waves ".

HISTORY:
   
      The italian scientist " guglielmo marconi" is know as the father of wireless communication , but in true sense marconi created operational transmitter as well as receiver . prior to him an Indian scientist sir"jagdish chandra bosh"worked of wireless communication but due to lack of support to science and technology in indian he is not able to patent it later it was patented by marconi .

WHY WIRELESS:

                             There are few points which support wireless communication,

1) The infrastructure required in wired communication is very high compared to wireless communication. 

"Infrastructure difference"

2) complexity of wired communication is very high and require high monitoring .

3) The errors in signal propagation in wireless communication will be less and they can be corrected easily as compared to wired communication.

4) The areas such as mountains and forests where wired communication is not possible there wireless communication is very helpful .

5) In present days portable communication is very necessary and wireless communication is like a boon to it.

HOW IT WORKS:

        Any wireless system basically consists of 3 components namely
Transmitter, Receiver and channel .
as shown in below figure.

"Blok diagram of wireless system"

SOURCE: 
                 "Its a component which      produce the useful signal that has to be transmitted over the channel"
It may be any thing like an microphone which will produce audio signal, a camera which create image / video etc .

TRANSMITTER: 
                         " The signal from source is not suitable for direct transmission to make it suitable and transmit an transmitter is used".
           The transmitter will produce an carrier signal and mix it with the signal from  source ie modulating signal with the help of modulator and transmit it over the wireless channel.

WIRELESS CHANNEL:
                                         " Its the wireless link which will connect transmitter to the receiver".
Along with useful signal an unwanted signal will also add up that is called as noise in wireless communication .
                               The channel is basically the environment i e, our air.
RECEIVER:
                    "Its an element which will receive the signals transmitted by transmitter". It consists of an receiving antenna which will collect the electromagnetic signals transmitted in environment.
And it also consists of demodulator which will separate the carrier signal from source signal .

DESTINATION:

                            "Its the element for which the signal was transmitted " .
Its a main root cause for the signal transmission . It may be anything like a speaker , radio, TV , computer, cell phone, etc.
  









qpsk

from numpy import ones,arange,cos,sin,pi from matplotlib.pyplot import plot,subplot,title,xlabel,ylabel,show M =4# i = range(0,M) t = a...